Scrap metal recycling for industrial metal shredders
Metal Shredding Solutions

Industrial Metal Shredders for Heavy Duty Scrap Recycling

High torque, low power consumption and long blade life for steel scrap, aluminum profiles and mixed metal waste. Factory direct supply with fast delivery to your country.

Get Quote Now

What Our Metal Shredders Can Do

Haitem industrial metal shredders are engineered to process a wide range of ferrous and non-ferrous scrap. Multiple machine types are available to match your material, capacity and output size requirements.

Suitable Materials & Applications
Steel and iron scrap for metal shredder
Steel & Iron Scrap Off-cuts, profiles, small castings, punched skeletons and other general steel scrap.
Car and auto body scrap for metal shredder
Car & Auto Body Scrap Stamped parts, light body scrap and mixed metal components from vehicle dismantling.
Metal drums and barrels for metal shredder
Metal Drums & Barrels Empty steel drums, paint buckets and industrial containers after proper cleaning.
Aluminum and copper scrap for metal shredder
Aluminum & Copper Scrap Extrusions, profiles, cables and mixed non-ferrous scrap for volume reduction and separation.
Mixed metal waste for metal shredder
Mixed Metal Waste Beverage cans, light gauge scrap and assorted metal waste from recycling centers.

Suitable Materials for Metal Shredding

Haitem metal shredders support a wide range of ferrous and non-ferrous materials. Below is a quick selection guide for material types and recommended machine scales.

Material Type Example Notes / Machine Scale
Steel & Iron Scrap Plates, pipes, structural profiles Small / Medium / Large models available
Car & Auto Body Scrap Car shells, doors, chassis Medium / Large models
Metal Drums & Barrels 200L drums, oil barrels Small / Medium / Large models
Aluminum & Copper Scrap Sheets, profiles, wires Small / Medium models
Mixed Metal Waste Household, industrial & manufacturing scraps All sizes

Key Highlights

  • Output Size: 20–300 mm (depending on material & blade choice)
  • Capacity Range: 0.5 – 20 TPH
  • Machine Options: Small, medium & large shredders for different project needs
Global Support Network

Industrial Shredders with Local Support Near You

Haitem works with trusted partners in India, Vietnam, the UK, Australia, and many other regions to provide faster communication, technical guidance, installation support, and after-sales service. Contact us to get connected with your nearest local representative.

Email Us

Metal Shredder Models & Specifications

From compact shredders for light scrap to heavy-duty systems for steel and auto scrap, Haitem provides complete metal shredding solutions. Explore the suitable model range below.

Small / Medium Metal Shredder
Small / Medium Shredder

Entry-Level & Compact Shredder

Best for: Light scrap, aluminum sheets, small metal parts

  • Capacity: 0.3–1.5 TPH (up to 2 TPH on light scrap)
  • Output size: 20–120 mm
  • Key features: Lower power, compact footprint

👉 Ideal for workshops & small recycling lines.

View Product
Heavy-Duty Metal Shredder
Double Shaft Shredder

High-Torque Heavy-Duty Shredder

Best for: Steel scrap, auto scrap, mixed metal waste

  • Capacity: 2–6 TPH (up to 7 TPH on light steel)
  • Output size: 50–200 mm
  • Key features: High torque, stable feeding

👉 Suitable for mid-scale recycling plants.

View Product
Large Industrial Shredder for Metal Scrap
Large Industrial Shredder

Large Metal Scrap Shredding System

Best for: Bulky scrap, car shells, industrial mixed scrap

  • Capacity: 5–10 TPH (up to 12 TPH on light metal)
  • Output size: 80–300 mm
  • Key features: Reinforced structure, oversized cutting chamber

👉 Ideal for large recycling companies & projects.

View Product
Extra-Large Metal Shredder
Four Shaft Shredder

Extra-Large Industrial Shredder

Best for: High-volume processing & uniform output requirements

  • Capacity: 8–15 TPH (up to 20 TPH on light metal)
  • Output size: 100–300 mm
  • Key features: Controlled cutting, anti-jamming performance

👉 Built for industrial-scale recycling projects.

View Product

*Actual throughput varies depending on scrap density, feeding method, and required output size.

Get a Recommendation & Quote

Engineered to Solve Real Metal Shredding Challenges

Industrial metal shredding involves tough materials, irregular feed and long operating hours. Haitem shredders are designed to address the most common operational challenges faced by recycling plants worldwide.

Frequent Jamming & Unplanned Downtime

❌ Irregular metal scrap, tangled materials and overload conditions often cause rotor jamming, leading to production stops and high downtime costs.

✅ High-torque drive systems, optimized cutter geometry and intelligent overload protection ensure smooth feeding and stable operation even with challenging scrap materials.

Uncertainty Across Different Scrap Materials

❌ Steel scrap, aluminum profiles, auto parts and mixed industrial waste all behave differently, making it difficult to use one shredder effectively.

✅ Modular shredder designs with selectable shaft configurations and cutting tools allow adaptation to a wide range of metal types and feed sizes.

Inconsistent Output Size for Downstream Processing

❌ Uneven particle size can reduce the efficiency of downstream separation, sorting or melting processes.

✅ Controlled cutting systems and optional sizing screens deliver consistent, predictable output, improving overall line efficiency.

High Maintenance Cost & Difficult Servicing

❌ Complex maintenance procedures and long service intervals increase labor cost and reduce machine availability.

✅ Maintenance-friendly layouts, replaceable wear parts and accessible components simplify servicing and reduce total cost of ownership.

Haitem vs Market Average

A quick comparison between Haitem industrial metal shredders and typical market alternatives in terms of structure, performance, efficiency and lifecycle cost.

Feature Haitem Metal Shredders Market Average
Structural Build Heavy-duty fully welded steel frame, thicker side walls, reinforced supports. Lighter housing with thinner plates and weaker frame strength.
Torque & Cutting Power High-torque gearbox and optimized low-speed rotor for thick steel scrap and mixed metals. Lower torque, typically handles only light metal or thin scrap reliably.
Blade & Rotor Quality Premium alloy steel blades, heat-treated; reinforced rotor with long service life. Standard blades with faster wear and more frequent replacement.
Material Versatility Handles ferrous, non-ferrous and mixed scrap in one line. Often limited to light metals or specific scrap types.
Power Consumption Optimized motor + gearbox ratio with lower kWh per ton processed. Higher energy consumption, efficiency drops under heavy load.
Maintenance & Downtime Modular access design, easy blade and screen replacement, minimal downtime. More complex maintenance with longer downtime and frequent blade changes.
Operation Ease Simplified control panel and clear safety logic; operators need only basic training. More complex operation, normally requires experienced operators.
Output Stability Stable output size and throughput under continuous heavy-duty work. Fluctuating output size and throughput under heavy load.
Scalability Multiple models from small to extra-large, easy to expand capacity. Limited model range, lower scalability.
Lifecycle Cost Lower lifecycle cost (energy, maintenance, blades and downtime). Higher total cost from energy waste, downtime and consumables.
After-Sales & Support In-house manufacturing, standardized parts and fast global technical support. Dependent on distributors with slower parts supply and variable support level.
Global Support Network

Industrial Shredders with Local Support Near You

Haitem works with trusted partners in India, Vietnam, the UK, Australia, and many other regions to provide faster communication, technical guidance, installation support, and after-sales service. Contact us to get connected with your nearest local representative.

Email Us

Factory & Processing Workshop

Real manufacturing environment showcasing machining, assembly and quality inspection of Haitem industrial shredders.

Factory Overview
Shredder Assembly
Machining Workshop
CNC Processing
Quality Inspection
Workshop View
Machining Area
Machining Station
CNC Equipment
Component Storage
Parts Racks

Combined Specification Table

Optimized performance specifications for Haitem’s full range of metal shredders, based on industry data and real project feedback.

Model Best For Capacity (TPH) Output Size (mm) Motor Power (kW) Machine Weight Rotor / Blade Notes
HT-600 Light scrap metal, aluminium sheets, small parts ≈ 0.5–1.5 (up to ~2 on light scrap) 20–100 15–22 ≈ 2.5 t Low-speed, high-torque shredder; designed for light scrap
HT-800 Mixed scrap metal, aluminium & copper profiles 1–3 (depends on scrap density) 30–120 30–45 5–6 t Low-speed, high-torque; export-friendly performance
HT-1200 Steel scrap, car shells, industrial metal ≈ 3–6 (up to 7 under favorable conditions) 50–200 55–110 9–12 t Oversized rotor; strong continuous-duty capability
HT-1500 Car bodies, metal drums, mixed heavy scrap 4–8 (up to 10–12 on light metal) 80–300 132–160 (opt 200–220) 14–18 t Reinforced frame for 24h heavy-duty work
HT-2000 Large-scale industrial scrap, heavy steel ≈ 8–15 (up to ~18 on light mix) 100–300 180–220 20–25 t High-torque rotor & reinforced gearbox

* Capacities are approximate and depend on scrap density, feeding method, rotor/blade configuration, and required output size.

Get Your Quote

Tell us your material. We’ll recommend the right shredder.

Send us your scrap type and capacity needs. Our team will propose the correct model and configuration.

  • Light scrap / mixed metal / heavy steel
  • Custom capacity & output size options
  • Fast engineering support
Successful Projects – Haitem Shredders

Successful Shredder Projects

Haitem industrial shredders have been commissioned in different regions and working conditions, supporting quarrying, recycling and waste-treatment projects for our global customers.

Haitem shredder project in Malaysia
On-site Installation

Project in Malaysia

Integrated shredding line for local aggregates and recycling applications.

Haitem shredder project in Europe
Continuous Operation

Project in Europe

Heavy-duty shredding system designed for high throughput and stable performance.

Haitem shredder project in Malaysia
Customer Site

Project in Malaysia

Customized layout adapted to the customer’s existing conveying and screening system.

Global Local Support – Haitem Shredders

Global Local Support

Local Support in Key Regions

We provide localized technical assistance in several regions to help customers communicate faster and receive smoother project support.

To offer faster and more efficient service, Haitem works with trusted local technical partners globally, including India, Vietnam, UK & Australia, and other regions.

Our local support teams help with early project discussions, model selection, installation guidance, and after-sales coordination — ensuring that your tire shredding project runs smoothly from start to finish.

Project consultation & requirement clarification
Model selection recommendations
Installation & startup guidance
Faster communication within similar time zones
After-sales coordination
💡

When sending your inquiry, mention your country (e.g., India project / UK project) so we can connect you to the nearest support team.

Haitem Global Support Network

Request A Quote